CatchAliveOne – Live Animal Trap – Wire Box Trap

CatchAliveOne is an intelligent trap alarm, which enables electronic monitoring of animal traps via an associated APP and web browser.

When CatchAliveOne trap alarm is used on wire box traps for live capture, it is detected either via a magnetic field or the degree of inclination of the door, which provides a very safe monitoring of the traps – no strings or pulls that can soften or get stuck.

With a CatchAliveOne trap alarm, electronic monitoring of the trap is ensured 24 hours a day. With the CatchAlive APP and web browser, details from each individual trap can be followed.

CatchAliveOne V1 has an external antenna and uses 2G network.
CatchAliveOne V2 has an internal antenna and uses NB-IoT 4G/5G network
.

Immediate notification upon catch

Immediately after activating a CatchAliveOne trap alarm, the user receives notifications about this on e-mail and in the APP. There is also an option of push notification in the APP.

You can change notification settings in the APP.

Meets legal requirements regarding supervision of live animal traps.

CatchAliveOne trap alarm on live animal traps meets the legal requirement for supervision of traps. 4 times a day the system checks itself.

CatchAliveOne trap alarm detects either via the degree of inclination of the door or via a magnetic field, which provides a very safe monitoring of the traps – no strings or pulls that can soften or get stuck.

It is possible to receive a status report 2 times daily if needed. Status report is enabled/disabled in APP.

No disturbing messages

The system behind the CatchAliveOne trap alarm is designed to disturb the user as little as possible.

This means that when you use CatchAliveOne trap alarm for electronic monitoring of your traps, you will only be notified when there is something you need to know. For example when something has been caught or if operational problems occur. For example if the CatchAliveOne trap alarm can not report due to missing mobile signal.

The system keeps track of itself and the electronic monitoring only notifies the users when there is something you need to know. Therefore, you are not disturbed by status messages 2 times daily.

It is possible to receive a status report 2 times daily if needed. Status report is enabled/disabled in APP.

You can check the CatchAliveOne trap alarm status in the APP at any time.

Safe and controllable mounting

When the CatchAliveOne trap alarm is mounted on a wire box trap, it will most often be mounted with a bracket on the side of the trap. A magnet must also be mounted on the door.

When CatchAliveOne trap alarm is set for this trap type in the APP, the trap is monitored through the magnetic field between the CatchAliveOne trap alarm and the magnet.

Via the APP, the user can check whether the CatchAliveOne trap alarm and the magnet are mounted correctly.

This gives the user a high degree of assurance that the electronic monitoring of the trap works as it should.

All brackets are specially designed and produced and sold by CatchAlive.

Subscription – All Inclusive

When you buy a CatchAliveOne trap alarm for electronic monitoring of your traps, a subscription is also included.

It is an all-inclusive solution, where the user does not have to bother with SIM cards, mobile subscriptions, etc.

With CatchAliveOne subscription, you get a SIM card, mobile subscription and data included in the package and the use of all functions in both the APP and web browser.

The subscription is subscribed for one year at a time and settled in advance.

Few operating costs

In addition to the subscription, you only need to provide batteries for your CatchAliveOne trap alarm.

We recommend Energizer Ultimate Lithium AA 1.5V or VARTA Ultra Lithium AA.

Batteries are included when you buy CatchAliveOne.

CatchAliveOne trap alarm uses 2 batteries and has an expected battery life of 6-12 months for 4 daily registrations (system checks). Lifetime depends on usage scenario.

The APP can be downloaded from Apple App Store and Google Play

The APP is the work tool where all traps with CatchAliveOne trap alarm are created with your description of location and position on the map.

Data from CatchAliveOne trap alarm is received and can be seen in the APP. Likewise, the user can note service of the trap, for example change of batteries or bait.

You can also write notes in connection with your service check, for example, what you have caught in the trap.

All information / data is stored in log books.

Web browser – Overview and Reporting

By logging in to the web browser, you get an overview of all CatchAliveOne trap alarms associated with you.

The web browser also shows all data received from CatchAliveOne trap alarm, as well as data the user has added via the APP.

The web browser has reporting tools where the user can print reports of captures with graphs etc.